5925-01-588-1718, CIRCUIT BREAKER

National Stock Number:
5925-01-588-1718

Federal Supply Class:
5925

National Item Identification Number:
015881718

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

IULNK11-1-52-60.0	1JPE4	PEERLESS ELECTRONICS INC
IULNK11-1-52-60.0	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

POLE QUANTITY	2
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	100.0 AMPERES DC ALL LOCATIONS
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	4 SCREW
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	80.0 DC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
RESET METHOD	MANUAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
CASE MATERIAL	PLASTIC
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	10000.0 DC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	1.000 MINIMUM AT 200 PCT AND
	10.000 MAXIMUM AT 200 PCT ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	1000.0 ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BODY LENGTH	2.490 INCHES NOMINAL
BODY WIDTH	1.515 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.940 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.060 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
BOSS HEIGHT	0.625 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.692 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD SIZE	6.0 MILLIMETERS
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
SPECIAL FEATURES	HAS SILICONE RUBBER SEAL AROUND THE TOGGLE HANDLE ENSURING PANEL SEAL INTEGRITY

Click here to Register for Free 30-day Trial