|
|
|
National Stock Number:
5310-00-033-7089
Federal Supply Class:
5310
National Item Identification Number:
000337089
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2F2953 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 2W1-25-32-63 | 43999 | THE BOEING COMPANY | | GW10U635SC2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | BACW10P73S | 81205 | THE BOEING COMPANY | | BACW10P73S | Z03F0 | BOEING DEFENCE AUSTRALIA LTD | | BACW10P73S | Z8T75 | BOEING DEFENCE AUSTRALIA LTD | | SP4300-118 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | VS15305-6039-16 | 77272 | THE BOEING COMPANY | | S1625-61806 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1020 OR | | STEEL COMP 1025 OR | | STEEL COMP 4150 OR | | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC 1ST MATERIAL RESPONSE AND | | MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE AND | | 66 FED STD 3RD MATERIAL RESPONSE AND | | SAE ASSN STD 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.380 INCHES MINIMUM AND | | 0.400 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.000 INCHES MINIMUM AND | | 1.020 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.063 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81205-BACW10 MANUFACTURERS STANDARD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81205 | | DESIGN CONTROL REFERENCE | BACW10P73S |
|
|