|
|
|
National Stock Number:
5310-00-032-9896
Federal Supply Class:
5310
National Item Identification Number:
000329896
Description:
NUT,PLAIN,CAP
Detail:
AN ITEM INTERNALLY THREADED FROM ONE END, AND COMPLETELY INCLOSED ON THE OPPOSITE END. THE OUTER PERIPHERY PARALLEL TO THE THREADED AXIS MAY BE SQUARE, CYLINDRICAL, HEXAGONAL, OCTAGONAL, OR DODECAGONAL AND TAPER TO A CONE OR DOME SHAPE ON THE CLOSED END. FOR LIKE ITEMS WHICH ARE STAMPED OR FORMED FROM SHEET STOCK, SEE NUT (1), STAMPED. FOR SIMILAR ITEMS WHICH ARE FLAT ON TOP AND BOTTOM SEE NUT (1), SLEEVE OR POST, ELECTRICAL-MECHANICAL EQUIPMENT.
|
Manufacturer Information:
| A15575-10 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | COPPER ALLOY 360 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 72 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | CAP | | NUT HEIGHT | 0.530 INCHES MINIMUM AND | | 0.550 INCHES MAXIMUM | | WIDTH ACROSS FLATS | 0.780 INCHES MINIMUM AND | | 0.840 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.062 INCHES NOMINAL | | BEARING SURFACE TYPE | CHAMFERED OR | | WASHER FACED | | NUT COUNTERBORE DEPTH | 0.040 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM NUT | | COUNTERBORE DIAMETER | 0.318 INCHES MINIMUM AND | | 0.338 INCHES MAXIMUM NUT | | BEARING SURFACE FINISH | 125.0 MICROINCHES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 00736 | | DESIGN CONTROL REFERENCE | A15575-10 |
|
|