|
|
|
National Stock Number:
3120-00-003-3844
Federal Supply Class:
3120
National Item Identification Number:
000033844
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| A51B53524-27 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B53524-27 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B53524-27 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| OVERALL LENGTH | 0.2420 INCHES MINIMUM AND | | 0.2500 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.4375 INCHES MINIMUM AND | | 0.4380 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.3680 INCHES MINIMUM AND | | 0.3700 INCHES MAXIMUM | | FLANGE OUTSIDE DIAMETER | 0.7450 INCHES MINIMUM AND | | 0.7550 INCHES MAXIMUM | | FLANGE WIDTH | 0.0610 INCHES MINIMUM AND | | 0.0640 INCHES MAXIMUM | | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER | | SQUARE OUTSIDE RIGHT CORNER | | SQUARE INSIDE RIGHT CORNER | | CHAMFERED INSIDE LEFT CORNER | | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER | | SQUARE LEFT FLANGE BODY CORNER | | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE | | 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 26512 | | DESIGN CONTROL REFERENCE | A51B53524-27 | | MATERIAL | STEEL COMP 4130 OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 37.0 ROCKWELL C MAXIMUM OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SOLID, EXTERNAL FLANGE ONE END |
|
|