| PLASTIC POLYHEXAMETHYLENE AMIDE OR |
| PLASTIC POLYCAPROLACTAM SEAL |
| IRON ALLOY SLEEVE |
| STEEL COMP E52100 OR |
| STEEL COMP E50100 STUD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OR |
| AISI ASSN STD ALL MATERIAL RESPONSES INNER RACE |
| AISI ASSN STD ALL MATERIAL RESPONSES OUTER RACE |
| 66 FED STD ALL MATERIAL RESPONSES OR |
| AISI ASSN STD ALL MATERIAL RESPONSES ROLLER |
| MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MIL-B-5687,TY 2,COMP A1 MIL SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| SAE ASSN STD ALL MATERIAL RESPONSES OR |
| AISI ASSN STD ALL MATERIAL RESPONSES STUD |
| SURFACE TREATMENT | CADMIUM OR |
| CADMIUM AND |
| CHROMATE EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR |
| QQ-P-416,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| STYLE DESIGNATOR | CAM FOLLOWER |
| THREAD LENGTH | 0.5000 INCHES NOMINAL |
| OVERALL LENGTH | 1.6260 INCHES MINIMUM AND |
| 1.6980 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.1245 INCHES MINIMUM AND |
| 1.1280 INCHES MAXIMUM |
| STUD DIAMETER | 0.4375 INCHES NOMINAL |
| OUTER RING WIDTH | 0.6200 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| STUD LENGTH | 0.9840 INCHES MINIMUM AND |
| 1.0310 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | ECCENTRIC BUSHING 0.6240IN. DIA MIN 0.6260 IN. DIA MAX BY 0.5000 IN.LG LOCATED 0.5000 IN.FROM END OF STUD 0.0300 IN.MIN 0.0330 IN. MAX ABOVE CENTER |
| MATERIAL | STEEL COMP E52100 OR |
| STEEL COMP E50100 INNER RACE |
| STEEL COMP E50100 OUTER RACE |
| STEEL COMP E50100 ROLLER |